GigaCore 26i : Discontinued

Most suitable applications
Fixed installations

PoE
Optional (up to 370W - up to 330W for Rev A)

RLinkX (Link redundancy)
Yes

Groups (VLAN segmentation)
Yes

MultiLinkX (Link aggregation)
Yes

Profile manager
Yes

Memory
4Mb

MAC address table
8192 Entries

Address learning / Aging
Self learning, Auto aging

Switching throughput 64 Byte

Switching capacity

Jumbo frames
MTU up to 9600

IGMP support
Yes (V1/V2/V3)

IGMP snooping
Yes, enabled by default

Port sensing
Auto negotiation

Auto crossover
MDI / MDIX

Auto sensing
Full or Half Duplex (Gigabit is Full Duplex)

Ethernet connectivity
24 x RJ45 connectors (incl. 4x dual media on ports 21-24)

Fiber connectivity
6 x SFP cages (incl. 4x dual media on ports 21-24)

Ethernet port speed
1Gbps

Serial
1 x serial RJ45 console port

Power connectivity

• 1 x IEC (14C) inlet
• 1 x redundant power input on Molex Mini-Fit Junior 14 pin connector

Power input
100-240VAC, 50-60Hz

Power consumption
Maximum 30W Maximum 430W with PoE

Fuse
None

Backup power input
12VDC / 2,5A

Backup PoE power input
-54VDC / 6,5A

PoE
Optional (up to 370W - up to 330W for Rev A)

Supported protocols
Avnu AVB/MILAN, Dante©, RAVENNA/AES67©, Ethersound©, Q-SYS/Q-LAN, REAC©, sACN, ArtNet, MANet2, HogNet, RTTrPL (BlackTraX), IEEE 802.1p CoS (Class of Service), DiffServ (DSCP), PoE (802.3af) (optional), PoE+ (optional), IEEE 1588 PTP V2

Sound protocol compliance
Yes (low jitter)

Ethernet compliance
IEEE 802.3, IEEE 802.3u, IEEE 802.3x Flow Control, IEEE 802.3ab Gigabit Ethernet

Display and jog
None

Configuration
Through the built-in web server

Status LEDs

• Global status LEDs: Device, power, PoE power, RLinkX and mode
• Port status LEDs: PoE, MultiLinkX, RLinkX, groups, link/activity and port speed
• Dark mode available

Colored RGB LEDs
Yes

Mounting
Rack

Enclosure
Robust metal housing

Dimensions (W x D x H)
482 x 270,3 x 44 mm (19" x 10,6" x 1,73")

Weight
4 kg

Packaging
545 x 420 x 80 mm (21,5" x 16,5" x 3,15")

Environment

• Operating temperature: 0 to +50 °C (non-PoE version), 0 to +40 °C (PoE version)
• Storage temperature: -10 to +70 °C
• Humidity (non condensing): 5 to 95% RH

Noise level @1m

• Max 22dBA (Ambient: 0 – 30°C)
• Max 33dBA (Ambient: 30 – 50°C)
• Max 22dBA (PoE <150W, Ambient: 0 – 30°C)
• Max 33dBA (PoE <150W, Ambient: 30 – 40°C)
• Max 33dBA (PoE >250W, Ambient: 0 – 30°C)
• Max 37dBA (PoE >250W, Ambient: 30 – 40°C)

BTU

Certificates/Approvals
cSGSus Mark, CE, CB certificate, RoHS

Standards
IEC 60950-1, UL 60950-1, CAN/CSA C22.2 No. 60950-1, EN 60950-1, FCC Part 15 CFR 47, CAN/ICES-003, EN 55022, EN 55024

Product codes

• LU 01 A0052 (GigaCore 26i Rev A)
• LU 01 A0052-POE (GigaCore 26i with PoE Rev A)
• LU 01 00052 (GigaCore 26i)
• LU 01 00052-POE (GigaCore 26i with PoE)